Planet WGS-5225-8P2SV User Manual page 332

 Hold Time
 RADIUS-Assigned
QoS Enabled
 RADIUS-Assigned
VLAN Enabled
 Guest VLAN Enabled
the client is still attached or not, and the only way to free any resources is to age
the entry.
This setting applies to the following modes, i.e. modes using the Port Security
functionality to secure MAC addresses:
Single 802.1X
■
Multi 802.1X
■
MAC-Based Auth.
■
If a client is denied access, either because the RADIUS server denies the client
access or because the RADIUS server request times out (according to the
timeout specified on the "Configuration→Security→AAA" page), the client is put
on hold in the Unauthorized state. The hold timer does not count during an on-
going authentication.
In MAC-based Auth. mode, the switch will ignore new frames coming from the
client during the hold time.
The Hold Time can be set to a number between 10 and 1000000 seconds.
RADIUS-assigned QoS provides a means to centrally control the traffic class to
which traffic coming from a successfully authenticated supplicant is assigned on
the switch. The RADIUS server must be configured to transmit special RADIUS
attributes to take advantage of this feature.
The "RADIUS-Assigned QoS Enabled" checkbox provides a quick way to
globally enable/disable RADIUS-server assigned QoS Class functionality. When
checked, the individual ports' ditto setting determines whether RADIUS-
assigned QoS Class is enabled for that port. When unchecked, RADIUS-server
assigned QoS Class is disabled for all ports.
RADIUS-assigned VLAN provides a means to centrally control the VLAN on
which a successfully authenticated supplicant is placed on the switch. Incoming
traffic will be classified to and switched on the RADIUS-assigned VLAN. The
RADIUS server must be configured to transmit special RADIUS attributes to
take advantage of this feature.
The "RADIUS-Assigned VLAN Enabled" checkbox provides a quick way to
globally enable/disable RADIUS-server assigned VLAN functionality. When
checked, the individual ports' ditto setting determines whether RADIUS-
assigned VLAN is enabled for that port. When unchecked, RADIUS-server
assigned VLAN is disabled for all ports.
A Guest VLAN is a special VLAN - typically with limited network access - on
332
User's Manual of WGS-5225-8P2S Series