4.3.6 VCL
4.3.6.1 MAC-Based VLAN
The MAC address to VLAN ID mappings can be configured here. This page allows adding and deleting MAC-
based VLAN Classification List entries and assigning the entries to different ports.
The table below explains the items shown on this page.
Object
Delete
MAC Address
VLAN ID
Port Members
Adding a New MAC to
VLAN ID mapping
entry
Figure 4-3-36: MAC-based VLAN Members
Description
To delete a MAC to VLAN ID mapping entry, check this box and press save. The
entry will be deleted in the stack.
Indicates the MAC address of the mapping.
Indicates the VLAN ID the above MAC will be mapped to.
A row of check boxes for each port is displayed for each MAC to VLAN ID
mapping entry. To include a port in the mapping, check the box. To remove or
exclude the port from the mapping, make sure the box is unchecked. By default,
no ports are members, and all boxes are unchecked.
Click
to add a new MAC to VLAN ID mapping entry. An empty
row is added to the table, and the mapping can be configured as needed. Any
unicast MAC address can be used to configure the mapping. No broadcast or
multicast MAC addresses are allowed. Legal values for a VLAN ID
are 1 through 4095.
The MAC to VLAN ID entry is enabled when you click on "Save". A mapping
without any port members will not be added when you click "Save".
The
button can be used to undo the addition of new mappings.
The maximum possible MAC to VLAN ID mapping entries are limited to 256.
156
User's Manual of WGS-5225-8P2S Series