4.5.10.2 VLAN Configuration
Each page shows up to 9999 entries from the VLAN table, default being 20, selected through the "entries per page" input field.
When first visited, the web page will show the first 20 entries from the beginning of the VLAN Table. The first displayed will be
the one with the lowest VLAN ID found in the VLAN Table. The VLAN Mode Configuration screen in
The page includes the following fields:
Object
VLAN ID
Buttons
: Click to update the displayed table starting from that or the closest next VLAN Table match.
: Click to use the next entry of the currently displayed VLAN entry as a basis for the next lookup.
:
Click to start over, when the end is reached the warning message is shown in the displayed table.
: Click to add a new entry to the Static ARP Inspection table.
: Click to apply changes
:
Click to undo any changes made locally and revert to previously saved values.
Figure 4-5-34: VLAN Mode Configuration Screen Page Screenshot
Description
Specify ARP Inspection is enabled on which VLANs. First, you have to enable
the port setting on Port mode configuration web page. Only when both Global
Mode and Port Mode on a given port are enabled, ARP Inspection is enabled on
this given port. Second, you can specify which VLAN will be inspected on VLAN
mode configuration web page. The log type also can be configured on per VLAN
setting. Possible types are:
None: Log nothing.
Deny: Log denied entries.
Permit: Log permitted entries.
ALL: Log all entries.
User's Manual of WGS-5225-8P2S Series
378
Figure 4-5-34
appears.