The page includes the following fields:
Object
Trap Config Name
Trap Mode
Trap Version
Trap Community
Buttons
: Click to add a new community entry. The maximum entry count is 32
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Description
Indicates which trap Configuration's name for configuring. The allowed string
length is 1 to 32, and the allowed content is ASCII characters from 33 to 126.
Indicates the SNMP trap mode operation. Possible modes are:
Enabled: Enable SNMP trap mode operation.
Disabled: Disable SNMP trap mode operation.
Indicates the SNMP trap supported version. Possible versions are:
SNMP v1: Set SNMP trap supported version 1.
SNMP v2c: Set SNMP trap supported version 2c.
SNMP v3: Set SNMP trap supported version 3.
Indicates the community access string when send SNMP trap packet. The
allowed string length is 0 to 255, and the allowed content is the ASCII characters
from 33 to 126.
79
User's Manual of WGS-5225-8P2S Series