4.3.8 MRP
4.3.8.1 Port Configuration
This page allows you to configure the
The Table below shows the settings can be made on this page.
Object
Port
Join Timeout
Leave Timeout
LeaveAll Timeout
Periodic Transmission
MRP
generic settings for all switch ports.
Figure 4-3-42: MRP Overall Port Configuration
Description
The port number for which the following configuration applies.
Controls the timeout of the Join Timer for all
port. This value is restricted to 1-20 centiseconds.
Controls the timeout of the Leave Timer for all
port. This value is restricted to 60- 300 centiseconds.
Controls the timeout of the LeaveAll Timer for all
switch port. This value is restricted to 1000- 5000 centiseconds.
Enable or disable the PeriodicTransmission feature for all
this switch port.
163
User's Manual of WGS-5225-8P2S Series
MRP
Applications on this switch
MRP
Applications on this switch
MRP
Applications on this
MRP
Applications on