Planet WGS-5225-8P2SV User Manual page 369

Object
 Snooping Mode
 Unknown IPv6 Next-
Headers
 Port Mode
Configuration
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Please note: Enabling this function require you to change the Key Type to "MAC and IP Address"
for all ports that will receive DHCPv6 packets. You can do this in the QoS Port Classification page.
Description
Indicates the DHCPv6 snooping mode operation.
Possible modes are:
Enabled: Enable DHCPv6 snooping mode operation. When DHCPv6 snooping
mode operation is enabled, the DHCPv6 client request messages will be
forwarded to trusted ports and only allow reply packets from trusted ports.
Disabled: Disable DHCP snooping mode operation.
Indicates how Unknown IPv6 Next-Header values should be treated. The switch
needs to parse all IPv6 packets to a DHCPv6 client to determine if it is in fact a
DHCPv6 message. If an unknown IPv6 extension header is encountered the
parsing cannot continue. See RFC 7610, section 5, item 3 for details.
Possible options are:
Drop: Drop packets with unknown IPv6 extension headers. This is the most
secure option but may result in traffic disruptions.
Allow: Allow packets with unknown IPv6 extension headers. This is a less
secure option but prevents traffic disruptions.
Indicates the DHCPv6 snooping port mode.
Possible port modes are:
Trusted: Configures the port as trusted source of the DHCPv6 messages.
Untrusted: Configures the port as untrusted source of the DHCPv6 messages.
369
User's Manual of WGS-5225-8P2S Series