4.3.10.4 IGMP Snooping Configuration
This page provides IGMP Snooping related configuration. The IGMP Snooping Configuration screen in
The page includes the following fields:
Object
Snooping Enabled
Unregistered IPMCv4
Flooding Enabled
IGMP SSM Range
Leave Proxy Enable
Proxy Enable
Router Port
Figure 4-3-62: IGMP Snooping Configuration Page Screenshot
Description
Enable the Global IGMP Snooping.
Enable unregistered IPMCv4 traffic flooding.
The flooding control takes effect only when IGMP Snooping is enabled.
When IGMP Snooping is disabled, unregistered IPMCv4 traffic flooding is
always active in spite of this setting.
SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and
routers run the SSM service model for the groups in the address range.
Enable IGMP Leave Proxy. This feature can be used to avoid forwarding
unnecessary leave messages to the router side.
Enable IGMP Proxy. This feature can be used to avoid forwarding unnecessary
join and leave messages to the router side.
Specify which ports act as IGMP router ports. A router port is a port on the
User's Manual of WGS-5225-8P2S Series
191
Figure 4-3-62
appears.