4.3.17.7 Link-OAM Example
CE and PE devices with point-to-point link enable EFM OAM to monitor "the First Mile" link performance. It will report the log
information to network management system when occurring fault event and use remote loopback function to detect the link in
necessary instance
The configuration of link-oam is quite simple.
Step 1. Set CE as Passive OAM mode
Step 2. Set PE as Active OAM mode
Step 3. Check OAM status and statistic from CE device
Figure 4-3-95: Typical OAM application topology
Figure 4-3-96: Link-OAM Example
Figure 4-3-97: Link-OAM Example
Figure 4-3-98: Link-OAM Example
Figure 4-3-99: Link-OAM Example
251
User's Manual of WGS-5225-8P2S Series