Poe Schedule Profile Configuration Example - Planet HPOE-1200G User Manual

User's Manual of HPOE-1200G / HPOE 2400G

4.5.4 PoE Schedule Profile Configuration Example

Please enable NTP and correct PoE hub system time first and make sure System PoE Admin Mode is enabled; otherwise,
you cannot configure PoE Schedule profile. You may see an error message as a screen shot is shown below. Screen in
Figure 4-5-5 shows.
Figure 4-5-5: Error Message of PoE Schedule Profile
As default value, all PoE Schedule Profile functions are disabled, but you can configure it anyway, and please enable the
function after you have finished all configurations.
A situation that enterprise wants PoE port1 to port 12 to be connected to VoIP phone and provide power for working from
8am to 5pm, five days a week. PoE port13 to 20 are connected to PoE wireless AP and provide power for working from 8pm
to 11pm five days a week. The other PoE port is connected to PoE camera, so it has to provide power 24 hours a day.
So, we can use 3 schedule profiles to meet the enterprise requirements as the following screen in Figure 4-5-6 shows:
Figure 4-5-6: PoE Schedule Profile Configuration
45