Product Features - Planet IGS-4215-16T2S User Manual

1.4 Product Features

Physical Port

16-port 10/100/1000BASE-T RJ45 with auto MDI/MDI-X function

2 SFP interfaces, supporting 100/1000BASE-X SFP transceiver type auto detection

1 RJ45 console interface for basic management and setup
Industrial Case and Installation

Dual power input, redundant power with reverse polarity protection
- DC 12 to 48V input or AC 24V input
- Active-active redundant power failure protection
- Backup of catastrophic power failure on one supply
- Fault tolerance and resilience

IP30 metal case

DIN-rail and wall-mount designs

Supports ESD 6KV DC Ethernet protection

Supports -40 to 75 degrees C operating temperature

Free fall, shock-proof and vibration-proof for industries
Switching

Features Store-and-Forward mode with wire-speed filtering and forwarding rates

IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation

8K MAC address table size

10K jumbo frame

Automatic address learning and address aging

Supports CSMA/CD protocol
Layer 2 Features

Supports VLAN
− IEEE 802.1Q tagged VLAN
− Up to 256 VLAN groups, out of 4096 VLAN IDs
− Provider bridging (VLAN Q-in-Q, IEEE 802.1ad) support
− Private VLAN (Protected port)
− Protocol-based VLAN
− Voice VLAN
− GVRP

Supports Spanning Tree Protocol
− IEEE 802.1D Spanning Tree Protocol (STP)
− IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
− IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
− BPDU Guard

Supports Link Aggregation
− IEEE 802.3ad Link Aggregation Control Protocol (LACP)
− Cisco ether-channel (static trunk)
User's Manual of IGS-4215-16T2S
16