Table of Contents
Advertisement
4.3.3.8 Protocol VLAN Group Setting
The network devices required to support multiple protocols cannot be easily grouped into a common VLAN. This may require
non-standard devices to pass traffic between different VLANs in order to encompass all the devices participating in a specific
protocol. This kind of configuration deprives users of the basic benefits of VLANs, including security and easy accessibility.
To avoid these problems, you can configure this Managed Switch with protocol-based VLANs that divide the physical network
into logical VLAN groups for each required protocol. When a frame is received at a port, its VLAN membership can then be
determined based on the protocol type being used by the inbound packets.
Command Usage
To configure protocol-based VLANs, follow these steps:
1.
First configure VLAN groups for the protocols you want to use. Although not mandatory, we suggest configuring a
separate VLAN for each major protocol running on your network. Do not add port members at this time.
2.
Create a protocol group for each of the protocols you want to assign to a VLAN using the Protocol VLAN Configuration
page.
3.
Then map the protocol for each interface to the appropriate VLAN using the Protocol VLAN Port Configuration page.
This page allows you to configure protocol-based VLAN Group Setting. The protocol-based VLAN screens in
Figure 4-3-45
appear.
The page includes the following fields:
Object
Group ID
Frame Type
Protocol Value
(0x0600-0xFFFE)
Buttons
: Click to apply changes.
User's Manual of GS-4210-8UP2S/GS-4210-16UP4C/GS-4210-24UP4C
Figure 4-3-44 Add Protocol VLAN Group Page Screenshot
Description
Protocol Group ID assigned to the Special Protocol VLAN Group.
Frame Type can have one of the following values:
Ethernet II
IEEE802.3_LLC_Other
RFC_1042
Note:
On changing the Frame type field, valid value of the following text field will
vary depending on the new frame type you selected.
Valid value that can be entered in this text field depends on the option selected
from the preceding Frame Type selection menu.
Valid values for frame type ranges from 0x0600-0xfffe
137
Figure 4-3-44
&
Advertisement
Table of Contents
