Expansion cards and backup units
▶ Push the internal RAID riser module to the rear to disengage the holes and
the bolts (1).
▶ Remove the internal RAID riser module (2) in a slight angle.
Concluding steps
▶
"Installing the fan cage" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶ If applicable, update the system information of your server using the Chassis
ID Prom Tool, see
▶
"Resuming BitLocker functionality" on page
9.8.3
Replacing an internal RAID riser module
Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Locating the defective server" on page
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the fan cage" on page
306
77.
59.
71.
"Using the Chassis ID Prom Tool" on page
50.
76.
Upgrade and Maintenance Manual
65.
107.
Hardware: 10 minutes
Software: 5 minutes
47.
89.
50.
55.
71.
113.
49.
RX2540 M7