Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 543

System state
e System reboot
f System power (DC) on, BIOS
setting restore
Record of the following
message on SEL when
completion.
Chassis IDPROM: BIOS
restore successful
g System reboot
h Active area BIOS restore form
iRMC microSD card
* Load and flash Active area
BIOS from the iRMC microSD
card.
i Active area BIOS restore
complete
Record of the following
message on SEL when
completion.
BIOS TFTP or HTTP/HTTPS
flash OK
j Active area BIOS boot check
*This check is performed
because a bootable BIOS
needs to be written to the
recovery site.
k System reboot
RX2540 M7
Power-
on
indicator
white on
green on
white on
green on
flashing
green
and white
green on
white on
Upgrade and Maintenance Manual
Appendix A
ID Time
indicator
flashing A few seconds
blue (5-10 seconds)
flashing About
blue 3 minutes
flashing A few seconds
blue (5-10 seconds)
flashing About
blue 8 minutes
flashing A few seconds
blue (5-10 seconds)
flashing About 1 minute
blue
flashing A few seconds
blue (5-10 seconds)
543