Replacing The M.2 Interposer Board - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

7.8.7

Replacing the M.2 interposer board

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Locating the defective server" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the air duct" on page 80
▶
"Removing the fan cage" on page
▶ If applicable, remove the riser module 2, see
page 72.
▶ If applicable,
"Removing the SAS expander board holder" on page
Removing the defective M.2 interposer board
▶ Remove the defective M.2 interposer board, see
interposer board" on page
Installing the new M.2 interposer board
▶ Install the new M.2 interposer board, see
board" on page
RX2540 M7
Hard disk drive (HDD) / solid state disk (SSD)
222.
219.
Upgrade and Maintenance Manual
Hardware: 15 minutes
47.
50.
50.
55.
76.
"Removing a riser module" on
"Removing the M.2
"Installing the M.2 interposer
49.
208.
225