Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 283

Installing the new expansion card
▶ If applicable, install the slot bracket, see
page 249.
▶ Install the expansion card, see
Concluding steps
▶
"Reassembling" on page
▶ If applicable, connect external cables to the expansion card.
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶
"Enabling replaced components in the BIOS" on page
▶ Inform the customer about changed WWN, MAC, GUID and SAS
addresses, see
page 109.
▶
"Updating the NIC configuration file in a Linux and VMware environment" on
page 106.
▶
"Updating expansion card firmware" on page
▶
"Setting boot priority" on page
▶
"Resuming BitLocker functionality" on page
▶ If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced controller (expansion
card).
Configuration of network settings should be performed by the
customer. For more information, see
recovery" on page
▶ If applicable, restore LAN teaming configurations, see
upgrading LAN controllers" on page
RX2540 M7
"Installing an expansion card" on page
59.
"Looking for MAC/WWN/GUID and SAS addresses" on
120.
281.
Upgrade and Maintenance Manual
Expansion cards and backup units
"Installing slot brackets" on
65.
71.
98.
107.
"Notes on network settings
115.
269.
71.
102.
"After replacing or
283