System Board; Replacing The System Board - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

System board and components
▶ For systems with ServerView related tools (i.e. ServerView Agentless
Service or ServerView ESXi CIM Provider) applied:
After replacing the iRMC microSD card, power on the server, and confirm
that the iRMC microSD card transfer completion message in the BIOS is
registered in SEL.
<BIOS>
BIOS backup from OS storage to SD card succeeded.
This function requires ServerView Agentless Service V10.40.08 for
Windows, V10.40.10 for Linux, or later versions.
▶ For systems with ServerView related tools (i.e. ServerView Agentless
Service or ServerView ESXi CIM Provider) non applied:
Manually update the BIOS after replacing the iRMC microSD card, see
"Updating or recovering the BIOS and iRMC S6" on page
17.6

System board

17.6.1

Replacing the system board

Field Replaceable Unit
(FRU)
510 Upgrade and Maintenance Manual
94.
Hardware: 40 minutes
Software: 20 minutes
(Firmware restore:
depending on configuration)
RX2540 M7