Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 271

Figure 148: Installing the expansion card
▶ Carefully insert the expansion card into the desired PCIe slot and press
down firmly until it is fully seated in the slot.
▶ If applicable, install SFP+ transceiver modules into the new expansion card,
see "Installing SFP+ transceiver modules" on page
▶ If applicable, connect the FBU cable to the FBU, see
page 321.
▶ Fasten the screw (see circle).
RX2540 M7
Expansion cards and backup units
Upgrade and Maintenance Manual
252.
"Installing an FBU" on
271