Indicator On The Odd - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

Appendix A
System state
l Active area BIOS boot check
continued
m Active area BIOS boot check
completion
Recovery area BIOS restore
Attention: the Power-on
indicator is not green but is
reading the active area BIOS
and updating the recovery area.
n Recovery area BIOS restore
completion
Record of the following
message on SEL.
BIOS TFTP or HTTP/HTTPS
flash OK (Recovery area)
Section d, f, h and l: the time it takes depending on memory and the number of
PCI cards installed. The above is the result of actual measurement without
loading a PCI card with two 8G memory modules.
From section c on, user can connect to iRMC S6 web interface.
From section d onward, the screen will be displayed on the connected display.
Please check the screen.
18.2.2.4

Indicator on the ODD

ODDs may have an indicator or not.
544
Power-
on
indicator
green on
white on
white on
Upgrade and Maintenance Manual
ID Time
indicator
flashing About
blue 3 minutes
flashing About
blue 5 minutes
blue off -
RX2540 M7