Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 319

Installing the new riser card
Figure 183: Installing the riser card
▶ Insert the riser card.
▶ Fasten the riser card with four screws (see circles).
▶ Install the expansion card, see
Concluding steps
▶ Install the corresponding riser module, see
page 74.
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
RX2540 M7
Expansion cards and backup units
"Installing an expansion card" on page
59.
65.
71.
Upgrade and Maintenance Manual
"Installing a riser module" on
71.
269.
319