Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 163

Installing the new 12x 3.5-inch HDD backplane
Figure 71: Installing the 12x 3.5-inch HDD backplane
▶ Insert the HDD backplane into the chassis.
▶ Fasten the nine screws (see circles).
▶ Install the internal RAID riser module, see
module" on page
▶ If applicable, install the SAS expander board holder, see
expander board holder" on page
Figure 72: Connecting cables to the 12x 3.5-inch HDD backplane
▶ Connect the following cables to the HDD backplane:
RX2540 M7
Hard disk drive (HDD) / solid state disk (SSD)
299.
205.
Upgrade and Maintenance Manual
"Installing the internal RAID riser
"Installing the SAS
163