▶ Insert the riser card.
▶ Fasten the riser card with four screws (see circles).
▶ Install the GPU card, see
page
284.
Concluding steps
▶ Install the corresponding riser module, see
page
74.
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
9.8
Internal RAID riser module
9.8.1
Installing an internal RAID riser module
Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the fan cage" on page
RX2540 M7
Expansion cards and backup units
"Installing a GPU card in a riser module" on
59.
65.
71.
50.
76.
Upgrade and Maintenance Manual
"Installing a riser module" on
71.
Hardware: 5 minutes
Software: 5 minutes
89.
50.
55.
49.
297