Server Rear; Connectors On The Server Rear - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

Error indicator (2)
Status
off
orange on
flashing orange
slowly
18.2.3

Server rear

18.2.3.1

Connectors on the server rear

Figure 364: Connectors on the server rear
1 Rear VGA connector
2 Serial interface (option)
3 OCP module (option)
The serial interface (2) can be used as the standard interface or for
communication with iRMC. The serial interface connector is an option.
RX2540 M7
Description
No HDD/SSD error detected.
An HDD/SSD error has been detected.
Possible causes:
– The drive is defective and needs replacing.
– A RAID rebuild process has failed.
– The HDD/SSD module has not been inserted correctly.
HDD/SSD RAID rebuild is in progress. Data is being
restored after replacing a drive that has been combined
into a RAID array.
Upgrade and Maintenance Manual
4 Management LAN connector
5 LAN connector (shared LAN)
6 USB 3.0 connectors (2x)
Appendix A
547