Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 552

Appendix A
LAN speed indicator (2)
Status
yellow on
green on
off
Indication of LAN connection supporting Energy Efficient Ethernet (EEE
mode)
To configure the EEE mode, it is necessary that an add-in LAN card supports
this mode and the connected switch supports this mode as well.
LAN link/transfer indicator (1)
Status
short flashing green 3x, then off
Table 16: LAN indicators if EEE mode is active
LAN speed indicator (2)
Status
short flashing yellow 1x, then 2
seconds off
green off
short flashing green 1x, then 2
seconds off
yellow off
Table 17: LAN indicators if EEE mode is active
552
Description
Data traffic at a transfer rate of 1 Gbit/s.
Data traffic at a transfer rate of 100 Mbit/s.
Data traffic at a transfer rate of 10 Mbit/s.
Description
A LAN connection has been established
(1 Gbit or 100 Mbit) and EEE mode is
active.
Description
Data traffic at a transfer rate of 1 Gbit/s.
Data traffic at a transfer rate of 100 Mbit/s.
Upgrade and Maintenance Manual RX2540 M7