Replacing A Riser Card - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

▶
"Locating the defective component" on page
Removing the defective expansion card
▶ Remove the internal RAID riser module, see
riser module" on page
▶ Remove the RAID controller, see
page 304.
Installing the new expansion card
▶ Install the RAID controller, see
▶ Install the internal RAID riser module, see
module" on page
Concluding steps
▶
"Installing the fan cage" on page
▶
"Reassembling" on page
▶ If applicable, connect external cables to the expansion card.
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶
"Enabling replaced components in the BIOS" on page
▶
"Updating expansion card firmware" on page
▶
"Resuming BitLocker functionality" on page
9.8.4

Replacing a riser card

Field Replaceable Unit
(FRU)
RX2540 M7
305.
"Removing the RAID controller" on
"Installing the RAID controller" on page
299.
77.
59.
71.
Upgrade and Maintenance Manual
Expansion cards and backup units
48.
"Removing the internal RAID
"Installing the internal RAID riser
65.
102.
98.
107.
Hardware: 5 minutes
300.
71.
307