Installing 2.5-Inch Hdd/Ssd Modules - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

Configuration with up to 24 2.5-inch PCIe SSDs and up to 6 2.5-inch
rear HDDs/SSDs without SAS expander board - part 2
16ch HBA/
Rear HDD
RAID (0)
Table 15: iRMC S6 web interface display
Information about HDD/SSD slots can also be displayed using the BIOS,
see "Displaying HDD/SSD slot information" on page
7.6.2

Installing 2.5-inch HDD/SSD modules

Customer Replaceable
Unit (CRU)
Tools: tool-less
Preliminary steps
▶ If applicable,
"Removing the front cover with lock" on page
▶ Locate the correct drive bay, see
Removing a 2.5-inch HDD/SSD dummy module
Unusable HDD bays contain a HDD/SSD dummy with dummy lock to
prevent customer from erroneously adding a HDD.
RX2540 M7
Hard disk drive (HDD) / solid state disk (SSD)
without
Expander
"Overview of configurations" on page
Upgrade and Maintenance Manual
Position Enclosure
[0] 1
[1] 1
[2] 1
[3] 1
[4] 1
[5] 1
143.
Hardware: 5 minutes
Slot
0
1
2
3
4
5
49.
165.
177