Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶ Update the system information of your server using the Chassis ID Prom
Tool, see
"Using the Chassis ID Prom Tool" on page
corresponding system name.
▶
"Performing a RAID array rebuild" on page
7.9.3
Upgrading with rear HDD cage 3
Upgrade and Repair Unit
(URU)
Tools:
– Phillips PH2 / (+) No. 2 screw driver
CAUTION
All data on all HDDs in the array will be lost when deleting the RAID
array!
▶
Be sure to back up your data before deleting a RAID array.
▶
For more information, see the "iRMC S6 - Web Interface" user
guide.
After installing or removing an additional backplane, never forget to
change the system information using the Chassis ID Prom Tool.
Preliminary steps
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
RX2540 M7
Hard disk drive (HDD) / solid state disk (SSD)
59.
65.
71.
50.
Upgrade and Maintenance Manual
71.
113. Select the
108.
Hardware: 10 minutes
Software: 10 minutes
50.
55.
49.
233