Replacing The Front Vga - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

Front panel
15.4.3

Replacing the front VGA

Upgrade and Repair Unit
(URU)
Tools: – Phillips PH2 / (+) No. 2 screwdriver (for cover 2)
– hexagon screwdriver 5 mm (for front VGA)
Preliminary steps
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ If applicable,
"Removing the riser module 1" on page
▶
"Removing the fan cage" on page
▶
"Removing the air duct" on page
Removing the defective front VGA
▶ Remove the front VGA, see
Installing the new front VGA
▶ Install the front VGA, see
Concluding steps
▶
"Installing the air duct" on page
▶
"Installing the fan cage" on page
▶ If applicable,
"Installing the riser module 1" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
476
50.
76.
80.
"Removing the front VGA " on page
"Installing the front VGA" on page
79.
77.
59.
65.
Upgrade and Maintenance Manual
Hardware: 5 minutes
50.
55.
72.
74.
49.
473.
470.
RX2540 M7