Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 542

Appendix A
System state
a Power cord connected
b iRMC boot start, iRMC firmware
restore from iRMC microSD
card (included golden image),
iRMC restart
Record of the following
message on SEL when
completion.
When iRMC version in iRMC
microSD card and iRMC version
of replaced system board is
different:
iRMC Firmware %1 has been
successfully restored
from SD card.
The Golden Image has been
successfully restored
from SD card
When iRMC version in iRMC
microSD card and iRMC version
of replaced system board is
same:
Restore of iRMC firmware
%1 omitted because the
already flashed firmware
has the same version
c iRMC boot complete, BIOS
restore prepare
d System power (DC) on, BIOS
setting initialize
542
Power-
on
indicator
-
flashing
white
white on
green on
Upgrade and Maintenance Manual
ID Time
indicator
- -
flashing About
blue 13 minutes
When iRMC
version in
iRMC microSD
card and iRMC
version of
replaced
system board
is same, the
time is
shortened
because iRMC
firmware
update is
skipped.
flashing About 1 minute
blue
flashing About
blue 3 minutes
RX2540 M7