Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 134

Power supply unit (PSU)
Preliminary steps
▶
"Locating the defective server" on page
▶ Check which PSU is defective.
PSU is defective when the PSU status indicator lights orange. For more
information, see
▶ Only when replacing a PSU in a non-redundant configuration:
down the server" on page
▶ Remove the power cord from the defective PSU, see
power cord" on page
Removing the defective hot-plug PSU
▶ Remove the PSU, see
Installing the new hot-plug PSU
▶ Install the PSU, see
Concluding steps
▶
"Connecting the power cord" on page
▶ Only when replacing a PSU in a non-redundant configuration:
the server" on page
▶
"Performing a fan test" on page
A fan test does not need to be performed if the hot-plug PSU is
actively replaced. iRMC runs automatically.
▶ Check that the PSU status indicator is lit green.
134
"Indicator on hot-plug PSU" on page
50.
50.
"Removing a hot-plug PSU" on page
"Installing a hot-plug PSU" on page
71.
117.
Upgrade and Maintenance Manual
47.
553.
"Disconnecting the
65.
"Shutting
129.
126.
"Switching on
RX2540 M7