OPERATIONS AND TIMING Sag
8) Turn VR103 on the DC controller PCB
so that the reading in the display of the
contro] panel is between 53 and 5d.
VR103
Figure 3-328
9) Make one copy, and check if it is free of
fogging but the print is dark enough.
* If fogging is noted or the characters
are too light, repeat the steps starting
with step 1) once again.
° If the problem cannot be corrected
after going through the steps once
again, use the density correction dial
(VR107).
VR107
Figure 3-329
COPYRIGHT © 1995 CANON INC.
CANON NPS012/NPGO12F NP6212 REV.1 SEPT. 1985 PRINTED
IN JAPAN (IMPRIME AU JAPON}
3-43