Table of Contents
Advertisement
EET ME CANAL SYS
I. PICK-UP/FEEDING
SYSTEM
A. Pick-Up Assembly
1.
Cassette Pick-Up Roller Unit
1)
Remove the cassette.
2) Open the right door, and remove the two
screws (D; then, remove the multifeeder
unit @.
Hunn
/
/
Ky
i
} /
Figure 4-301
3) Remove the spacer @).
Figure 4-302
4-22
COPYRIGHT © 1995 CANONINC.
4) While pushing down the shaft retainer
@, move the cassette pick-up roller
shaft @ toward the front.
Figure 4-303
5) While removing the bushing ©, remove
the cassette pick-up roller unit @.
Figure 4-304
CANON NP6O12/NPGOI2E/NP6212 REV.1 SEPT. 1996 PRINTED IN JAPAN (IMPRIME
AU JAPON)
Advertisement
Chapters
Table of Contents
