Canon NP6012 Service Manual page 26

—_—L_L_— SSS NEAL DESCRIPTIONS
1)
2)
ADF Cleaning Mode (NP6012/NP6212
only)
Place about 10 sheets of white copy
paper on the original tray of the ADF.
Operate so that 'U6' appears on the
count/ratio indicator; then, press the
Copy Start key.
* The sheets of copy paper on the origi-
nal tray of the ADF will be picked up in
sequence.
Figure1-412
To end user mode, press the AE key.
Installation/Drum Unit Replacement
Mode (U7)
*Only for a model with the drum unit
replacement time automatic indication func-
tion.
1)
Operate so that 'U7' appears on the
count/ratio indicator; then, press the
Copy Start key.
¢ The indication changes to '71'.
COPYRIGHT © 1995 CANON INC.
Figure 1-413
2)
3)
Using the +/- key, enter the value of
'PRIMARY ' recorded on the drum unit.
° Appears in the top left of the
count/ratio indicator while a value is
being entered.
Figure 1-414
After entering the value of 'PRIMRY',
press the Copy Start key to store the
value.
«A press on the Copy Start key
changes the indication to '72'.
CANON NP6012/NPEO12F /NP5212 REV.1 SEPT. 1995 PRINTED IN JAPAN (MPRIME AU JAPON)
1-19