Table of Contents
Advertisement
MECHANICAL SYSTEM maa
7) Put the shorter side of the wire @ under
9) Fish the rear end of the shorter side of
mirror 1 mount ©, then hook it on the
the wire © through the hole @ at the
pulley (2 of mirror 2 and 3 mount as
right side face.
shown in the figure below.
Figure 4-227
8) After hooking the shorter side of the wire
@ on the pulley
@ of mirror 2 and 3
Figure 4-229
mount, fish it between mirror 1 mount @
and the scanning lamp @).
10) Remove the fixing for the shorter side @
and longer side ©) of the backing wire
and connect both using the spring 4.
Figure 4-226
Figure 4-230
COPYRIGHT © 1995 CANON INC.
CANON NP6Q12/NPGO12F/NPG212 REV.{ SEPT. 1995 PRINTED
N JAPAN (IMPRIME AU JAPON)
4-13
Advertisement
Chapters
Table of Contents
