Canon NP6012 Service Manual page 175

MECHANICAL SYSTEM
10) While extending the bushing (2, remove B. Multifeeder Assembly
the pick-up clutch unit @.
1. Removing the Multifeeder Assembly
1) Open the right door.
2) Remove the two screws (), and remove
the multifeeder assembly @.
Figure 4-314
11) Remove the E-ring (9 and the washer Figure 4-316
j , ick-up clutch @ ) . f , :
2): then. pulvoubthe prkeupieluton 2) Removing the Multifeeder Pick-Up
@ Roller
® 1) Remove the multifeeder assembly. (See
E '4. Removing the Multifeeder Assembly.")
2) Remove the bushing @ and the gear (2)
while disengaging the claw @).
Figure 4-315
Figure 4-317
COPYRIGHT © 1995 CANON INC. CANON NP6Q12/NPSO12F /NP6212 REV.1 SEPT. 1905 PRINTED IN JAPAN (IMPRIME AU JAPON} 4-25