Table of Contents
Advertisement
MECHANICAL SYSTEM Ei
4)
Remove the timing belt ©, and remove
6)
Remove the stop ring (0 (resin) and the
the feeding belt roller @ by shifting it in
bushing @).
the direction of the arrow.
.
Figure 4-915
7) Disconnect the two connectors (2, and
remove the five screws (3; then, remove
the drive unit @.
Figure 4-913
5) Remove the five screws @), and remove
the right hinge unit ©.
Figure 4-916
D. Feeding System
Figure 4-914
1,
Pick-Up Roller
1) Remove the drive unit ©. (See "1. Drive
Unit.")
Figure 4-917
COPYRIGHT © 1995 CANONINC.
CANON NP6QI2/NPGOt2F /NPO2t2 REV. SEPT. 1995 PRINTED
IN JAPAN (IMPRIME AU JAPON}
4-55
Advertisement
Chapters
Table of Contents
