Table of Contents
Advertisement
Wl MECHANICAL SYSTEM
7)
Remove the four screws ©), and remove
2.
Removing the Main Drive Assembly
the main motor unit ©.
1) Remove the drum unit.
2)
Remove the top cover.
3)
Disconnect the 13 connectors
@ from
the composite power supply PCB @.
Aft
atts r
ae =f It
Figure 4-253
that the belt is free of twists.
4)
Remove
the screw @, and remove
the
high-voltage terminal unit @.
Figure 4-254
4-20
COPYRIGHT © 1995 CANONINC.
CANON NPGO12/NP6OT2F/NP6212 REV.1 SEPT. 1995 PRINTED
IN JAPAN (IMPRIME AU JAPON)
Advertisement
Chapters
Table of Contents
