CX} OPERATIONS AND UMNG
SS
ee
SSS
EE ESSE
Starting Service Mode
1) Open the copier's top unit, and remove
2) Turn on the copier, and short the jumper
the two screws @; then, remove the
wires JP3 and JP4 on the DC controller
upper front cover @).
PCB with a screwdriver.
* The count/ratio indicator on the control
panel turns on 'F'.
A flexible cable for the control panel is
connected to the front upper cover;
take care not to damage the cable.
Figure 3-1002
Figure 3-1004
3) When 'F' has turned on, stop shorting
the jumper wires JP3 and JP4.
4)
Turn off and then on the copier.
3-104
COPYRIGHT © 1995 CANON INC,
CANON NP6012/NP6O12F /NP6212 REV.1 SEPT. 1905 PRINTED IN JAPAN (IMPRIME AU JAPON)