Table of Contents
Advertisement
3 | Remove the shipping
attachment @ on the right
side of the main unit. (In
step 7, insert the shipping
attachment @ in the
shipping attachment
holder.)
INSTALLATION fa
Note;
You will need this
shipping a l t
transport
the copier,
sostoreitinthe
shipping attachment
holder.
Sta
Raise the platen glass
cover and remove the
sheet from the platen
glass.
Lift the main unit lever on
the left side to open the
top of the main unit.
COPYRIGHT © 1995 CANON INC.
Squeeze and remove the
attachment located inside
under the top of the main
unit.
Insert the shipping
attachment @ and @ in
the shipping attachment
holder which were
removed in steps 2 and 3.
Shipping attachment
holder
CANON NP6O12/NPGOI2F/NPG212 REV.1 SEPT. 1995 PRINTED IN JAPAN (IMPRIME AU JAPON}
5-3
Advertisement
Chapters
Table of Contents
