Table of Contents
Advertisement
MECHANICAL SYSTEM MB
3) Remove the drum unit.
3.
Installing the Developing Assembly
4)
Turn the toner cartridge ©) clockwise.
1)
Insert the hook
@ of the developing
assembly into the hole @ the copier's
top unit.
Figure 4-604
5)
Puta hand under the developing assem-
bly ©, and turn the locking Jever ®
counterclockwise.
* Turning the locking lever disengages
the developing assembly.
Figure 4-606
or
2) While working as in step 1), lift the
;
-
developing
assembly
and butt the
Take care not to touch the developing
groove (4) of the developing assembly
cylinder.
:
against the hooks @ at the rear and the
front.
Figure 4-605
Figure 4-607
COPYRIGHT © 1995 CANON INC.
CANON NP6012/ NPGO12F/NP6212 REV.1 SEPT. 1995 PRINTED IN JAPAN (MPRIME AU JAPON)
4-41
Advertisement
Chapters
Table of Contents
