Table of Contents
Advertisement
DESI RE CHANG AL SV SE SS
Vill. ELECTRICAL
SYSTEM
A. DC Controller PCB
1.
Removing the DC Controller PCB
3) Disconnect all connectors from the DC
1) Open the copier's top unit.
controller PCB @); then, remove the
2) Remove the two screws (@, and remove
screw @) and free the six claws © to
the front upper cover @.
remove the DC controller PCB @.
The flexible cable for the control panel
is connected to the upper front cover;
disconnect the cable from the DC con
troller PCB.
Figure 4-802
Figure 4-801
4-50
COPYRIGHT © 1995 CANON INC.
CANON NPSO12/NPEOI2F/NP6212 REV.1 SEPT. 1995 PRINTED IN JAPAN {IMPRIME
AU JAPON)
Advertisement
Chapters
Table of Contents
