Canon NP6012 Service Manual page 31

H. Using the Scanning Lamp
Heater Switch
If the site of installation is subject to low
temperature or the first time copy is subject
to a delay, make use of the scanning lamp
heater to prevent problems.
Scanning lamp =~
heater switch
Figure 1-428
The scanning lamp heater is activated
when the heater switch is turned on
while the power plug is connected
{regardiess of whether the copier's
power switch is off).
1-24 COPYRIGHT © 1995 CANON INC.
I. Cleaning
If the images tend to be soiled or copy
paper tends to jam frequently, advise the
user to clean the following parts:
1. If tmages are Soiled
it. If the dirt cannot be removed, wipe it with
a cloth moistened with mild detergent solu-
tion, and dry wipe it.
b. Cassette Pick-Up Roller
1) Remove the cassette.
2) Open the right cover.
Do not make copies until the cassette
pick-up roller has dried completely.
Cassette pick-up roller
Separation
pad
Figure 1-429