Table of Contents
Advertisement
~~
___—L__
EE
SSS
SSS
EET
OPERATIONS AND TIMING
B. Basic Operations
1.
Outline
The ADF uses two motors for picking up
and delivering originals. The pick-up motor
(M2) is used to pick up originals, and the belt
motor (M1) is used to move, stop, and deliv-
er originals.
Further, the ADF is equipped with three
sensors for monitoring the movement
of
originals.
The ADF is designed to accommodate
one-sided original copying mode only.
ADF controller PCB
©
5-3
Pick-up
motor
drive
signal
per detection
signal
(PDP1)
Figure 3-704
COPYRIGHT © 1906 CANONINC.
CANON NPGO12/NPGO12F /NP6212 REV.1 SEPT. 1995 PRINTED IN JAPAN (MPRIME AU JAPON)
3-71
Advertisement
Chapters
Table of Contents
