Canon NP6012 Service Manual page 21

mag GENERAL DESCRIPTION ———
2) Place an original on the copyboard, and
close the copyboard cover.
4) Press the Default Ratio key or Zoom
Mode key to suit the reproduction ratio
you want.
a. When you press the Zoom key, you
may set the ratio between 70% and
141% in 1% increments.
b. When you press the Default Ratio
key, the ratio changes as follows for
each press:
MAX. 141%
DIRECT 100%
MARGIN 86%
LGL > LTR 78%
MIN. 70%
(Inch- configuration)
A5 »& A4
BS A4/LTR
B5 A5/STMT
leas >
(AB/Inch- iin it
5) Place a single transparency on the sin-
glefeeder.
« You must not set more than one trans-
parency on the singlefeeder.
6) Select the multifeeder using the Paper
Select key.
7) Set the copy count you want using the
Copy Count/Zoom Set key; then, check
the Copy Count indicator.
8) Press the Copy Start key.
* Be sure to remove each transparency
delivered to the copy tray before the
next one is delivered.
1-14 COPYRIGHT © 1995 CANON INC,
Smoothly
cm.
Transparency
meee =
(pro a
a paper
Figure 1-405
Figure 1-406