Table of Contents
Advertisement
a
MECHANICAL SYSTEM
ll. DRIVE SYSTEM
A. Scanner Drive Assembly
For instructions on removing the ADF,
see IX. "ADF."
.
Removing the Scanner Drive Motor
1) Remove the top cover. (See "Removing
the Top Cover")
2) Loosen the two or three screws (D, and
remove the copyboard glass @).
®
®
®
Figure 4-201
3)
Remove the four screws ©, and remove
the lens cover @.
Figure 4-202
COPYRIGHT © 1985 CANON INC.
4) Remove the Front Lower Cover. (See
"Removing the Front Lower Cover.")
5)
If the copier came with an ADF as stan-
dard, open the upper frame unit, and
remove the two screws ©) to remove the
sub hinge mount ©).
Figure 4-203
6)
If the copier came with an ADF as stan-
dard, remove the spring @.
Figure 4-204
CANON NP6O12/NP6O12F/NP6212 REV.1 SEPT. 1995 PRINTED IN JAPAN (IMPRIME AU JAPON)
4-5
Advertisement
Chapters
Table of Contents
