MECHANICAL SYSTEM mal
3.
Feeding Belt
4) Remove the timing belt @, and remove
1) Remove
the lower cover.
(See "B,
the feeding belt drive roller
© by moving
Removing the External Covers.")
it in the direction of the arrow.
2) Remove the two tension springs @.
Figure 4-924
Figure 4-922
5)
Remove the two equalizer spring
© and
3) Remove the E-ring @, and remove the
the two feeding belt rolls @.
bearing @).
Figure 4-925
Figure 4-923
COPYRIGHT © 1995 CANONINC.
CANON NP6012/NPGO12F /NP6212 REV.1 SEPT. 1995 PRINTED IN JAPAN (APRIME AU JAPON)
4-57