Canon NP6012 Service Manual page 210

Wa MECHANICAL SYSTEM ———
E. Electrical System
1. ADF Controller PCB
1) Remove the lower cover. (See "B.
Removing the External Covers.")
2) Disconnect the five connectors @, and
remove the two screws @); then, remove
the ADF controller PCB @).
Figure 4-932
2. Original Placement Sensor and
Registration Paper Sensor
Pay attention to the colors of the cables
and connectors when connecting the con-
nectors of the origina! placement sensor and
the registration paper sensor.
Cable color
Purple
Yellow
Registration paper sensor
Connector color
Table 4-901
Original
placement
sensor
Registration
paper sensor
Figure 4-933