(MECHANICAL S950 9 RR
SS
B. Lens Drive Assembly
6) Puta marking © on the lens cable fixing
For instructions on removing the ADF,
plate @ and the lens mount ®.
see IX. "ADF."
.
Removing the Lens Cable
1) Select DIRECT mode, and disconnect
During assembly, make sure that the
the power plug.
lens cable fixing plate and the lens
2) Remove the copyboard cover.
mount are positioned with reference to.
3)
Remove the top cover. (See "Removing
the markings.
Seen
the Top Cover")
4)
Remove the main drive assembly. (See
"2. Removing the Main Drive Assembly.")
5)
Remove the four screws @, and remove
the lens cover @.
Figure 4-239
7) Disengage the No. 4/5 mirror mount ©
and the cam @.
8
Figure 4-238
Figure 4-240
4-16
COPYRIGHT © 1995 CANON INC,
CANON NP5O12/NP6O12F /NP6212 REV.1 SEPT, 1995 PRINTED IN JAPAN (IMPRIME
AU JAPON}