[ETM HANI AL S099 9S
SSS
mount as shown in the figure below.
Figure 4-225
6) Remove the fixing for the shorter side of
the wire @) and hook the wire on the pul-
ley @ at the right rear side as shown in
the figure below.
Figure 4-223
4) After hooking the longer side of wire ©
on the pulley © of mirror 2 and 3 mount,
route it through between mirror 1 mount
@ and scanning lamp ©.
Figure 4-226
Figure 4-224
4-12
COPYRIGHT © 1995 CANON INC,
CANON NP6C12/ NPSOT2F/NPS2I2 REV.1 SEPT, 1995 PRINTED
IN JAPAN (INPRIME
AU JAPON)