Canon NP6012 Service Manual page 195

———E—_———S_— SESS SSS | CHANICAL SYSTEM
Vil. FIXING SYSTEM
1. Construction
@
@ Drive roller @ Inlet guide
@ Tension roller © Lower fixing roller
@® Fixing film © Fixing heater
Figure 4-701
The fixing film is made of special mate-
rial; do not touch it of soil it,
The upper fixing unit is to be replaced
on a unit basis.
COPYRIGHT © 1995 CANON INC, CANON NP6012 /NP6OI2F/ NP6212 REV.1 SEPT. 1995 PRINTED IN JAPAN (MPRIME AU JAPON}
2. Removing the Upper Fixing Unit
1) Open the copier's top unit.
2) Remove the two screws (D, and remove
the front upper cover @.
disconnect the cable from the > x
troller PCB.
Figure 4-702
3) Disengage the two claws ©, and slide
the left cover @ down to remove.
Figure 4-703
4-45