Table of Contents
Advertisement
HB MECHANICAL SYSTEM
2) Install the developing assembly cover,
6.
Points to Note When Installing the
and tighten the five screws lightly; then,
Drive Gear
tighten the screws in the order indicated
a.
Assemble the gears so that all three stir-
below.
ring rods () face the same direction.
4th
Figure 4-616
3) Turn the drive gear ® slowly in the
direction indicated below to give the
developing cylinder a full turn.
'among the rods
operation.
4)
Figure 4-617
4-44
COPYRIGHT © 1995 CANON INC,
CANON NP60{2/NP6O12F/ NPE212 REV.1 SEPT, 1995 PRINTED
IN JAPAN (IMPREME AU JAPON)
Advertisement
Chapters
Table of Contents
